Comparison lists
Product comparison
4 / 4 article
max. number for this category reached!
Please remove at least one article from the category to add further articles.
Comparison lists
Product comparison
was added to the comparison list.
Add article
You will need to add the products to the comparison list to compare them.
Comparison lists
Product comparison
da en
// eslint-disable-next-line max-len
Hybrid: Assembly gloves Spider
Showcase
Hybrid: Assembly gloves Spider
Hybrid: Assembly gloves Spider
Hybrid: Assembly gloves Spider 2
#7644008

Assembly gloves Spider

115,00 kr.
plus shipping
inc VAT
from 6 pair:
105,00 kr.
from 60 pair:
95,00 kr.
Delivery time approx. 3-6 working days
Size
8
pair
Assembly gloves Spider
8
115,00 kr.
inc VAT
plus shipping
pair

PRODUCT INFORMATION
Hybrid: Assembly gloves Spider
Description
Details
Extras
  • EN 388:2016, Mechanical risks, 2121X
  • Breathable and wear-resistant synthetic leather on palms
  • Anti-slip mesh made of silicone for better grip
  • Palms with reinforcements on heavy-wear areas
  • Breathable and elastic back for a perfect fit
  • Flexible width adjustment thanks to sturdy Velcro fastener
  • Applications: For general assembly work
  • Length: approx. 24 cm
Material:
Palm
60 %Polyamide/
40 %Polyurethane
Back of hand
97 %Polyester/
3 %Elastane

Click on the "Data Sheet" button for more information and technical details.

Additional information

RECOMMENDED USE
Our assessments are based on practical experience. The valid EN standards have not been taken into consideration. The properties of the individual gloves were assessed in comparison to all other gloves of the respective material group. The higher the assessment, the more suitable the glove is for this field.

Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Abrasion
6
Breathability
6
Chemical protection
0
Cold
2
Cut
3
Dexterity
5
Fat/Oil
2
Heat
2
Wet protection
3
Puncture
2
Tear
4
Wet grip
3

Purchase advice
Find alternatives
Compare the current article with the best alternatives

Assembly gloves Spider
Assembly gloves Spider
Assembly gloves Spider

features:
18
from 76,00 kr. (ex VAT)
from 95,00 kr. (inc VAT)
from 60 pair
8 - 11
Abrasion
Breathability
Chemical protection
Cold
Cut
Dexterity
Fat/Oil
Heat
Wet protection
Puncture
Tear
Wet grip
20 - 24 cm
Hybrid
Mechanics' glove with a perfect fit. Sturdy, breathable, maximum grip and abrasion resistance.
EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.
Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Hybrid gloves
  • Highly comfortable to wear
  • Breathable
  • Sturdy
  • High quality material
  • For light and heavy duty work
Assembly gloves

These products are work gloves with a perfect fit, superior grip and numerous important protective details. Thanks to the use of proven and forward-thinking materials, these gloves have a much higher fit precision and more dexterity than conventional work gloves, thereby making them ideal for everyday use in the professional health & safety field.

Hide all Unfold all
Compare all details Hide all details
Show only differences

Price

from 119,00 kr. (ex VAT)
from 148,75 kr. (inc VAT)
from 12 pair
from 135,00 kr. (ex VAT)
from 168,75 kr. (inc VAT)
from 36 pair
from 34,00 kr. (ex VAT)
from 42,50 kr. (inc VAT)
from 144 pair

Available colours

Available sizes

7 - 11
6 - 11
7 - 12

Glove application recommendation

Glove total length

20 - 24 cm
20 - 24 cm
20 - 24 cm

Material / coating

Hybrid
Mechanics' glove with a perfect fit. Sturdy, breathable, maximum grip and abrasion resistance.
Hybrid
Mechanics' glove with a perfect fit. Sturdy, breathable, maximum grip and abrasion resistance.
Hybrid
Mechanics' glove with a perfect fit. Sturdy, breathable, maximum grip and abrasion resistance.

Protection standard

EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.
EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.
EN 388:2016
Protection against mechanical risks, such as abrasion, cuts, puncturing, tears or impact cuts.

Extras

Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Hybrid gloves
  • Highly comfortable to wear
  • Breathable
  • Sturdy
  • High quality material
  • For light and heavy duty work
Assembly gloves

These products are work gloves with a perfect fit, superior grip and numerous important protective details. Thanks to the use of proven and forward-thinking materials, these gloves have a much higher fit precision and more dexterity than conventional work gloves, thereby making them ideal for everyday use in the professional health & safety field.

Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Hybrid gloves
  • Highly comfortable to wear
  • Breathable
  • Sturdy
  • High quality material
  • For light and heavy duty work
Assembly gloves

These products are work gloves with a perfect fit, superior grip and numerous important protective details. Thanks to the use of proven and forward-thinking materials, these gloves have a much higher fit precision and more dexterity than conventional work gloves, thereby making them ideal for everyday use in the professional health & safety field.

Mechanical risks EN 388:2016

Mechanical risks

Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.

Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.

Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no

The higher the number (shown with an X below the icon in the example), the better the test result.

Hybrid gloves
  • Highly comfortable to wear
  • Breathable
  • Sturdy
  • High quality material
  • For light and heavy duty work
Assembly gloves

These products are work gloves with a perfect fit, superior grip and numerous important protective details. Thanks to the use of proven and forward-thinking materials, these gloves have a much higher fit precision and more dexterity than conventional work gloves, thereby making them ideal for everyday use in the professional health & safety field.

Note


Size
8

Engelbert Strauss ApS

Phone
70 20 91 18
Fax
70 20 91 19

Language selection

da en
All prices plus shipping on orders below 998,75 kr..
All prices plus VAT plus shipping on orders below 799,00 kr..
{"Accept-Language":["The acceptLanguage field is required."]}